HCL:V-Raptor SQ nano
The V-Raptor SQ nano is a personal ARM workstation and server that fits in your hand.
Technical Data
- Socionext Synquacer Cortex A53 (24 cores @ 1GHZ)
- Up to 32GB DDR4 ECC
- M.2 NVME SSD
- 1 Gbps Ethernet
- 4 x USB 3.0
- 1 x Mini USB Debug UART
- OLED display
openSUSE on SQ nano
The V-Raptor SQ nano has UEFI and boots from USB, follow the generic ISO aarch64 UEFI instructions.
Debug port
The V-Raptor SQ nano has one Mini USB Debug UART that can be used to access the serial console and other debug options. The FT4232H is a quad-high-speed USB to multipurpose UART that when connected, has four serial devices, ttyUSB[0-3].
- ttyUSB0 - UEFI / Linux console
- ttyUSB1 - V-Raptor SQ nano Board Controller / Bootloader
- ttyUSB2 - SynQuacer Firmware
- ttyUSB3 - Unknown
Use ttyUSB0 to change the boot order, configure UEFI, or access the Linux console. The configuration is 115200-8-N-1.
minicom -D /dev/ttyUSB0 -b 115200 -c on
Manuals
The manuals are in Korean but can be easily translated.
Troubleshooting
No IP address shown in the OLED display
TBD