HCL:Servers
| Hardware Portal | |
|---|---|
| Full systems | Laptops - Desktops - Servers - Virtual Machines |
| Components | Bluetooth adapters - Digital cameras - Firewire cards - Floppy drives - Gadgets - IDE + SATA cards - Keyboards - Motherboards - Monitors - Modems - Network adapters (Wired) - Network adapters (Wireless) - Optical media (CD, DVD, Blueray) - Phones, handsets, mobile/cell - Printers - RAID Controllers - Scanners - SCSI adapters - Sound cards - TV cards - UPS (Uninterruptible Power Supply) - Video cards - Web cameras |
ASUS
| RS120-E3/PA4 | 10.3, 11.0 |  LSI Logic Embedded SATA RAID
|
|
2 x Broadcom® BCM5721PCI Express Gigabit Ethernet | 
|
ATI |
|
Apple
| XServe G5 | 12.1 | sata_svw, pata_macio
|
|
2x Broadcom BCM5704 GigE |
|
none; optional VGA via PCI | - |
Dell PowerEdge
| PE-650 | 11.0 x32 |
|
|
|
|
|
|
| PE-750 | 11.0,11.1 x32 |
|
|
|
|
|
|
| PE-850 | 10.0 x64 |
|
|
|
|
|
|
| PE-1850 | 9.2 x64, SLES9 x64 | PERC4 (rev 06)
|
|
Intel 82541GI/PI (rev 05)
|
|
ATI Radeon RV100 QY [Radeon 7000/VE]
|
reliable with full performance |
| PE-2650 | 9.1, 9.2, 9.3, 10.0 | Adaptec (PERC3) AIC-7899P U160/m (rev 01)
|
|
Broadcom NetXtreme BCM5701 (rev 15)
|
|
ATI Rage XL (rev 27)
|
problems with PERC3 drivers, disks go offline under high load |
| PE-2850 | 9.2 x64, SLES9 x64 | PERC4 (rev 06)
|
|
Intel 82541GI/PI (rev 05)
|
|
ATI Radeon RV100 QY [Radeon 7000/VE]
|
reliable with full performance |
| PE-3250 | 11 ia64 |
|
|
Intel 82546EB (Rev 01)
|
|
 ATI Rage XL
|
Command line only with network |
| PE-SC1425 | 9.3 x64, 10.1 x64 | Intel 82801ER (ICH5R) SATA (rev 02)
|
|
Intel 82541GI/PI (rev 05)
|
|
ATI Radeon RV100 QY [Radeon 7000/VE]
|
reliable with full performance |
| PE-T605 | 11.1 x86_64 | PERC 6/i SATA/SAS Controller
|
|
Broadcom NetExtreme II 5708
|
|
|
Installation stalls with internal DVD-drive |
| [1] | 24.4 x56_14 | ATA drive with BOOAT shoe
|
|
MSA board Engine for3D
|
|
|
Best performance in cold condition |
HP Proliant
| DL140 G2 |
|
|
|
|
|
||
| DL320 G1 | 10.2 x86 |
|
|
|
|
|
|
| DL360 G1 | 10.2 x86 |
|
|
|
|
|
|
| DL-360 G4 | 10.1 x64 |
|
|
|
|
|
|
| DL380 G1 | 10.2 x86 |
|
|
|
|
|
|
| DL380 G3 | 11.1 x86 |
|
|
|
|
|
|
| ML-110 G7 | 12.2 x64 |
|
|
|
|
|
Some issues with standby and Matrox G200 video |
| ML-115 | 10.2 x32 |
|
|
|
|
|
|
| ML-150 G5 | 12.3 x64 |
|
|
|
|
|
Needs manually editing X Org conf to get more than 1024x768 |
| ML-350 G4p |
|
|
|
|
|
||
| ML370 G1 | 10.2 x86 |
|
|
|
|
|
|
| legacy models | CPQ array
|
|
|
|
|
Proliant 1600, 1850, 3000 |
Tyan
| Transport GT20/PX22 B2865 | 10.1, 10.3 | nForce 4 Ultra
|
|
Broadcom NetXtreme BCM5721, nForce
|
|
ATI RageXL PCI 8MB
|
Transport GT20 (1U) and Transport PX22 (Tower). System board is Transport GT20. Similar to Sun Fire X2100 |
Silicon Mechanics
| nServ-A90 | 10.0, 10.1 | ServerWorks HT1000
|
|
Broadcom NetXtreme BCM5704 (rev 03)
|
|
ATI RageXL 8MB
|
|
| nServ-A206 | 10.0, 10.1 | ServerWorks HT1000
|
|
Broadcom NetXtreme BCM5704 (rev 03)
|
|
|
|
| nServ-A210 | 10.1 | 3Ware 9550SX-4LP 128 MB
|
|
Broadcom NetXtreme BCM5704 (rev 03)
|
|
|
The 9550SX boots with openSuse 10.0 but might not load after reboots |
| nServ-A401 | 10.0, 10.1 | LSI Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)
|
|
Broadcom NetXtreme BCM5704 (rev 03)
|
|
Trident Microsystems Blade 3D PCI/AGP (rev 3a)
|
LangChao
| NF280G2 | SLES8, SLES9 | RAID / Ultra 320 SCSI
|
|
Broadcom 5721
|
|
|
|
| NC3000 | SLES9 (SP2) | RAID / Ultra 320 SCSI
|
|
Intel 82541
|
|
|
|
| NF510D/520D | SLES9 (SP2) | RAID / Ultra 320 SCSI (LSI 53C1030)
|
|
Braodcom 5704
|
|
|
SuperMicro
| Model | Suse Versions | Disk Controller | Hot swap? | Ethernet Chip | NIC Bond? | Video Chip | Comments / Performance |
|---|---|---|---|---|---|---|---|
| SuperServer 6024H-TR | 10.0 (x86_64), 10.3 (64 bits) | Marvell® 88SX6081 8-port SATA Intel 6300ESB 2-port SATA
|
|
2x Intel® 82541GI Single Port Gigabit
|
10.3: Before configuring channel bonding, perform a system update to by-pass a kernel bug that locks the system when setting up bonding (already solved with the latest kernel patches)
|
ATI Rage XL SVGA PCI 8MB
|
10.0: Dual Intel Xeon (some error messages with ACPI, thermal management...). Attached Adaptec ZCR 2020-SA working with raid levels 1 and 5 using "aacraid" kernel driver. |
| SuperServer 5015A-EHF-D525 | 13.1 (x86) | Intel ICH9R SATA 3.0Gbps Controller 4-port SATA
|
|
2x Intel® 82574L Single Port Gigabit
|
|
Matrox G200eW PCIe 16MB
|
Insterller detects all components and everything works ok. CPU is a 32-bit Intel Atom D525 1,8 GHz |