Please note that if a piece of hardware was working on a previous release than the current one, there is a pretty good chance that it will work on the most recent release. However, there is no guarantee that the current release did not somehow break the driver or configuration for that piece of hardware (for example refer to Bug 168618). Please check that the hardware continues to work as expected for the most recent release before updating the s for the most recent release in the following tables.
External Serial
Vendor
|
Model
|
Interface
|
Works by Default
|
SuSE versions
|
Comments
|
Ovislink
|
OF-56SERIAL
|
RS-232 (serial port)
|
|
10.0 (64 bits), 10.1 (32 bits), 10.3 (64 bits)
|
External serial modem/fax/voice working with HylaFAX
|
USRobotics
|
3Com U.S. Robotics 56K Faxmodem (5630)
|
RS-232 (serial port)
|
|
From 7.x to 10.3
|
Tested as modem and fax
|
Zoom
|
3049 External Serial RS232 56K Faxmodem [1]
|
RS-232 (serial port)
|
|
9.0, 10.0, 10.2
|
Fax function not tested, works with Windows XP
|
Zoom
|
3048 External Serial RS232 56K Faxmodem [2]
|
RS-232 (serial port)
|
|
10.0, 10.2
|
Fax function not tested, works with Windows XP
|
Trendnet
|
TFM-560X External Serial Modem
|
RS-232 (serial port)
|
|
8.0, 8.2 and higher
|
ISDN
Vendor
|
Model
|
Interface
|
Works by Default
|
version
|
Comments
|
Hamlet
|
HISDNCI [3], [4]
|
PCI card
|
|
Suse 9.3 and newer
|
-
|
USB
Vendor
|
Model
|
Interface
|
Works by Default
|
version
|
Comments
|
Nokia
|
CS-12
|
USB 3G modem
|
|
openSUSE 13.2
|
Uses ppp as a protocol with wvdial
|
Zoom
|
Zoom 3095 [5]
|
USB 56K
|
|
11, 10.x (?)
|
requires 2.6.19 kernel or newer, but if you compile one it will work. 32 bit only, not 64 bit. See here [6]
|
TrendNet USB-Serial Adaptor
|
TU-S9
|
USB 56K, connects to serial modem
|
|
At least openSUSE 11 and up,
|
possibly older distros too (2032 chipset is recognized by SUSE 8.2)
|
Verizon
|
PC5750
|
Type II PANTECH USB MODEM
|
|
OpenSuSE 11.1
|
Confirm all details from this post!!:[7] baudrate limit is 115200
|
Dlink
|
DWM-152 [8]
|
USB 3G/3.75G modem
|
|
12.1
|
lsusb shows 07d1:a804 D-Link System A detailed instruction is here. [9]
|
Wireless
PCI/Internal
Vendor
|
Model
|
Interface
|
Works by Default
|
OpenSuSE version
|
Comments
|
Lucent
|
LT Winmodem
|
PCI
|
|
OpenSuSE 11.1
|
works with martian Lucent/Agere drivers
|
Conexant
|
Winmodem
|
PCI
|
|
openSUSE 11.1
|
Works with Linuxant drivers
|
U.S.Robotics
|
Coyote Winmodem
|
PCI
|
|
openSUSE 11.4
|
Does not work, no means to make it work
|
PCMCIA
Vendor
|
Model
|
Interface
|
Works by Default
|
OpenSuSE version
|
Comments
|
Aldiga
|
A-100 [18], [19]
|
PCMCIA
|
|
OpenSuSE 11.0
|
baudrate limit is 57600
|
Linksys
|
PCMLM56 EtherFast 10/100 + 56K Modem PC Card
|
PCMCIA
|
|
SUSE7.3 and up
|
absolutely flawless/easy, and a good network card too
|