HCL:Orange Pi Zero2

Soc: Allwinner H616

Vendor page: http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-2.html

Community page: http://linux-sunxi.org/Orange_Pi_Zero2

Specifications

CPU	H616 @ 1.512 Ghz Quad-core Cortex-A53 H.265 Main10@L5.1 decoder up to 4K@60fps or 6K@30fps
GPU	Mali400MP2 GPU @600MHz Supports OpenGL ES 2.0
Memory	1GB DDR3 SDRAM
Onboard Storage	TF card (Max. 32GB) 2MB Spi Flash
Onboard Network	10/100/1000M Ethernet RJ45 (passive POE possible with some soldering)
Onboard WIFI	AW859A (unsupported): IEEE 802.11 ac, BT
Audio Input	MIC(via 13 pins external board )
Video Outputs	Micro HDMI 2.0a, CVBS on header
Power Source	USB OTG
USB 2.0 Ports	One USB 2.0 HOST One USB-C 2.0 OTG 2 X USB2.0 Host on header
Low-level peripherals	26 Pins Header 13 Pins Header, with 2x USB, IR pin, AUDIO(MIC, AV)
LED	Power led Status led
Size	53 mm × 60 mm
Weight	26 g

u-boot

u-boot upstream config orangepi_zero2_defconfig

u-boot distribution package u-boot-orangepizero2

When new there is no software the board enters FEL when powered on.

System Installation

Write the EFI image to SD card or boot from network

Tumbleweed

JeOS image E20 image XFCE image LXQT image GNOME image KDE image X11 image

If the direct links above do not work for you, please check the general download directory for the images.

Leap-15.3

JeOS image E20 image XFCE image LXQT image GNOME image KDE image X11 image

If the direct links above do not work for you, please check the general download directory for the images.

xzcat openSUSE-Tumbleweed-ARM-JeOS-efi.armv7l-2020.09.29-Snapshot20200928.raw.xz | dd of=/dev/disk/by-id/usb-Generic_USB_SD_Reader_12345 bs=1M status=progress