HCL:JetsonTX2

Jump to: navigation, search

The Nvidia Jetson TX2 and Jetson TX2i are systems-on-module with an Nvidia devkit and several third-party carrier boards available.

Technical details

  • Nvidia Jetson TX2 SoM
    • Nvidia Tegra X2 (T186) SoC
      • 2x Nvidia Denver2 CPU
      • 4x Arm Cortex-A57 CPU
      • 256x Nvidia Pascal GPU
    • 8 GB RAM
    • 32 GB eMMC
  • SD
  • 1x USB 3.0, 1x USB 2.0 OTG
  • SATA
  • HDMI
  • 1Gb Ethernet
  • Wifi
  • PCIe

Manual installation

The Jetson TX2 does not ship with enterrcm command in U-Boot. To force the board into recovery mode, hold REC while powering on via POWERBTN and briefly press RST while keeping REC pressed.

# ./flash.sh jetson-tx2 mmcblk0p1

Arm Trusted Firmware

An arm-trusted-firmware-tegra186 package is prepared.

U-Boot

A u-boot-p2771-0000-500 package is prepared.

See also