Discover it
Toolbox
HCL/Laptops/Other
From openSUSE
 | Hardware Compatibility List - Laptops main page Acer - Apple - Asus - Compaq - Dell - Digital - ECS - E machines - Everex - Fujitsu - Gateway - Hasee - Hitachi - Higrade - HP - IBM/Lenovo - Medion - Micron - Mitac - Mitsubishi - MSI - NEC - Panasonic - Samsung - Sony - Toshiba - Zenith - Other |
| Legend: |  Works to some extent |  Does not work |  Not Tested |  Not Applicable
|
Contents |
[edit]
Advent
| Model | SUSE Linux version | Hardware Support | Remark: | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | ||||
| 4211 | 11.0 + KDE4 (32bit) | | | | with manufacture drivers | | Suspend to disk: Suspend to RAM: "s2ram -f" required | Card reader: Webcam:
| Browse here for more details | |
| 7086 | openSUSE 11.1 (i586) + KDE4.1.3 | SiS Chipset - No 3D | SiS Chipset | | But not used | |
| Card reader, USB, Synaptec Mouse, HP printer/scanner using HPLIP | Worked with very little configuration for 10.3 and 11.1 | |
[edit]
AHTEC
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| Signal X-9600 | 10.3 (32bit) | | | | | | Suspend to disk: Suspend to RAM: Battery & Powersave: | Card reader: Modem 56Kb: Special buttons:
| Test made with KDE. Everithing works very fine. |
[edit]
AJP
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| M3000N | 10.3 (32bit) from DVD | | | | | | doesn't successfully turn off |
Must install with kernel in safe mode. Choose KDE desktop if you want to be able to use native 1400x1050px resolution. | If you update the kernel beyond what is on the standard 10.3 install disk then you will only render the desktop on the LHS of the screen - disable kernel updates to keep it in full screen!
Wireless and wired networks function, as does USB. Not managed to get it to actually hit the off switch - you have to pull the battery out to actually kill it (although it seems happy on a restart if you do this). Similarly with suspend to disk - it sleeps fine, and even if you have to pull the plug as described it will still restore your session. |
[edit]
Belinea
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| o.book 2.1 | 11.0 64-bit | With proprietary ATI-Catalyst driver | | | | | Suspend to disk: Suspend to RAM: changing CPU-Speed: | Modem: ; Cardreader: , but slow in Card detection; Webcam: ; TV-Out,Two screens: | Switching off internal speakers when plugging in headphones doesn't work - with changings in settings, switch off by KMix possible; Special buttons not working except Volume Up/Down/Mute & Silent Mode |
[edit]
BENQ
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| Joybook 6000N | 10 | | | | | | Suspend to disk: Suspend to RAM: CPU powersave: | Everything works well, without any effort. The only useful stuff is to set the native resolution
to 1280x800 with the command: "855resolution 3c 1280 800" in the file /etc/rc.d/boot.local or for SUSE 10.1, follow the instructions given in Patch the Video BIOS. Enjoy!!! | |
| Joybook T31 | 10.2 | | | | | | | special buttons don't work | |
| Joybook S52E | 10.0 | | Conexant AC97, detected, configured, no sound | | ndis | no bluetooth, but works with dongle | never try lid thing though | function key works for brightness, not sound volume(coz no sound?) | |
| Joybook S52E | 10.3 | | Out of box! | | ndis | no bluetooth,but works with dongle | Even hibernate | ||
[edit]
Clevo
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| Clevo M55G | 10.1 | | | | | | Suspend to disk: Suspend to RAM: CPU powersave: | SD/MMC CardReader not working. | Works very smooth. I only had to set the native resolution to 1400x1024 using 855resolution package. Integrated i915GM VGA runs even Compiz very smoothly. Enjoy! |
| Clevo M55G | 10.2 | | | | | | Suspend to disk: Suspend to RAM: CPU powersave: | SD/MMC CardReader will work if you load sdhci and mmc_block modules by hand. | Works very smooth. I only had to set the native resolution to 1400x1024 using 855resolution package. Integrated i915GM VGA runs even Compiz very smoothly. Enjoy! (For SD/MMC: edit /etc/sysconfig/kernel and set MODULES_LOADED_ON_BOOT="sdhci mmc_block") |
| Clevo M55G | 10.3 | | | | | | Suspend to disk: Suspend to RAM: CPU powersave: | SD/MMC CardReader does not work. | Works very smooth. Integrated i915GM VGA runs even Compiz/CompizFusion very smoothly. Enjoy! |
| Clevo M55G | 11.0 | | | | | | Suspend to disk: Suspend to RAM: (must add "force" option to s2ram)CPU powersave: | SD/MMC CardReader will work if you load sdhci and mmc_block modules by hand. | Works very smooth. Integrated i915GM VGA runs even Compiz very smoothly. Enjoy! (For SD/MMC: edit /etc/sysconfig/kernel and set MODULES_LOADED_ON_BOOT="sdhci mmc_block") |
| Clevo M570ru | 11.1 | | | | | | Suspend to disk: Suspend to RAM: CPU powersave: | SD/MMC | Everything works except the 'bison' webcam whose driver used to work but is no longer maintained... |
[edit]
COMPAL
As compal is a barebone supplier some parts are interchangeable which results in a blank cell, make sure to check out the Remark field for information with specific hardware.
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| EFL30 | 9.3 | | | | | | Suspend to disk: Suspend to RAM: CPU powersave: | WebCam doesn't work yet; Working: Nvidia6400, SD slot, Firewire port | Do not load battery module in powersaved configuration or you will have severe problems with the ElanTech 4 button touchpad. |
| EFL30 | 10.0 | | | | | | Suspend to disk: Suspend to RAM: CPU powersave: | WebCam not supported yet; Susp2Ram recovery slow but works w/kernel2.6.13-15.8-default; wifi & nvidia recover from suspend | Nvidia 6400, SD slot, firewire port all work. Occasional touchpad "lost synchronization" problems. |
| HL90 | 11.0 | | | | ~ | ~ | Suspend to disk: Suspend to RAM: CPU powersave: | Compiz-Fusion is slower than it should be up to at least NVIDIA driver 177.80 due to the power minimizer feature. Touchpad default configuration makes 50% of the touchpad vertical scroll, solved by using a default usb mouse driver for it instead. (Or getting the latest Synaptic driver) | If combined with an intel wireless 4965AGN card it works sporadically |
| HL90 | 11.1 | | | | ~ | ~ | Suspend to disk: Suspend to RAM: CPU powersave: | In contrast to 11.0 the touchpad is configured properly by default (even the vertical scroll works) | The previously sporadically working intel 4965AGN card now works properly but only if you're not making use of the network manager and instead use yast > network devices to set up the wireless settings. |
| HL90 | 11.2 | | | | ~ | ~ | Suspend to disk: Suspend to RAM: CPU powersave: | Intel 4965AGN card now works out of the box. | |
| JFL92 | 11.1 | | | | | | Suspend to disk: Suspend to RAM: CPU powersave: | Working: Nvidia8600GT, SD/MS slot (MS part not supported yet), webcam, audio, battery charge level and button (via latest compal-laptop module), CIR module with rc6 remote - upgrade of lirc is needed (with ene0100 module support, there were also a bug in acpi that has been already corrected and shipped in linux-2.6.32-rc3), fingerprint reader, all button leds beside the mute led, DVB part of YUAN Hybrid TV card (1164:1f08). Doesn't work: Mute button led, YUAN Hybrid TV card (analog/radio part) - no analog framework support in dvbusb - there were plans to do it but the chances that this project will start are smaller day by day.. | |
[edit]
Eurocom
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| 2700T Viper | 10 x86-64 | | | | | | | Looks good to me. I did have problems with installing GNOME, but KDE seems ok. | |
[edit]
Evesham
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| C520 | 10.1 | | | | | | | Installed and runs excellently. The default NVIDIA drivers pick up the 6200 and the only issue I had with them was to set the default resolution to 1280x800 rather than 1024x768. The only issue i've found is that the memory card reader does not work. | |
[edit]
GENESIS
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Otherwork | |||
| 5620DS | 9.3 | | | | | | So-So | Keyboard's extra buttons not work no way, Also there is no ATI Radeon Mobility 9000 driver so i use compatible 9200 driver without 3D support | |
[edit]
Great Quality (Fry's)
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| MX-3203 | 10.0 OSS Released | (3D acceleration not tested) | | | | | CPU powersave: | CD install experienced random "package-not-found" errors, but Network install worked flawlessly. | |
[edit]
HASEE
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| Q400N | 11.1 64 bit | | | | | | Suspend to RAM Suspend to Disk CPU Powersave | Installed and runs excellently. Some problems with the OpenGL rendering, I suppose it's an issue with Mesa or maybe the Intel video drivers, although the rendering objects are quite fast. | |
[edit]
LG
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| LG P1-KPHEV expr dual | 10.2 CD 32-bit | | terrible fighting with alsa source, but works . do not update your kernel or you have to fight again. LOL | needed manual driver install from source kernel update mixes up and reinstall is necessary | | | suspend to disk had difficulties to return network connection..works. | touchpad, fingerprint sensor | dvd/rw works, almost every "extra"-button works |
| LG P1-KPHEV expr dual | 11.1 CD 32-bit | | | | | | | touchpad, fingerprint sensor, cardreader, modem not tested | dvd/rw works, almost every "extra"-button works, fingerprint sensor works with fprint |
| LG LM70 Express | 11.1 11.0 32-bit | Note-1 | Note-2 | | | n/a | Note-3 | touchpad, 56 Kb modem not tested smartcard reader not tested | Note-1 - 11.1 openGL drivers work on the Radeon X600. Proprietary graphic drivers do not. 11.0 - proprietary graphic drivers work Note-2 - audio out jack and mic in jack work. note-3 - suspend to ram works sometimes. suspend to disk works on kde (crashes gnome). |
| Legend: | Works to some extent | Does not work | Not Tested | Not Applicable
|
[edit]
MaxData
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| MaxData 8100 IWS Pro | 10.3 CD 32-bit | laptop has 1680x1050 monitor, driver from ATI and manual correction of Xorg.conf was needed (default installation-->1280x1024--> some images were "squeezed" vertically) | manual alsa configuration needed, but works. | | | | | touchpad, media buttons, fingerprint reader, smartcard reader | In principle, everything works fine, but some extra configuration is needed |
[edit]
SAGER
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| NP4750V 3700+ | 10.0 x86-64 | | | | | | CPU powersave & cpuspeed | Everything works well including webcam. Need 1.05 BIOS; fixed DSDT! Same as Clevo D470K | |
| NP5660 | 10.1 | | | | | | | Note: ndiswrapper got my wireless USB adapter to work, but it broke hibernate! | |
[edit]
STAMP
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| 223 | 10.3 | | | | | | Suspend to RAM using GRUB: Suspend to RAM using LILO: Suspend to disk: | SD card reader: | |
| 223 | 10.2 | | | | | | Suspend to RAM: Suspend to disk: | SD card reader: | |
| 223 | 10.1 | | | | | | Suspend to RAM: Suspend to disk: | SD card reader: | Video badly broken and unusable. Setup tool sax2 locks up. |
| 223 | 10.0 | | | | | | Software suspend: | SD card reader: | |
| Note - The Stamp Model 223 is identical to the LC2100 which was sold in the USA by Linux Certified. | |||||||||
[edit]
UNIWILL
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| Uniwill N341C2 | 10.0 beta4 | (3D works with newer dri driver from dri.freedesktop.org) | | | | | Suspend to disk: Suspend to Ram: | modem detected, but driver not available | Also sold as Targa Visionary 1900 |
| Uniwill IIO223 | 10.0 RC1 | | | | | | Suspend to disk: Suspend to Ram: | Modem is working, so as MMC/SD Card reader | Also sold as Prestigio Visconte 120 and under many other brands |
| Uniwill N35BS1 | 10.0 OSS released | | | | | | Suspend to disk: Suspend to Ram: | Modem is working | Also sold as Jewel saffier 1440+ and many other brands |
| Uniwill 223EI0 | 10.3 OSS released | | | | | | Suspend to disk: Suspend to Ram: Not tested yet. | Also sold as Alienware Sentia m3200 and many other brands | |
[edit]
Xxodd
| Model | SUSE Linux version | Hardware Support | Remark: | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Video | Sound | Ethernet | Wireless | Bluetooth | Power Management | Other | |||
| Xxodd 8227d | 11.1 | (3D works with the restricted Nvidia driver) | | | | | Suspend to disk: | works with 32bit and 64bit | integrated genesys usb 2.0 webcam doesn't work no output from headphone jack |
| Legend: | Works to some extent | Does not work | Not Tested | Not Applicable
|
The content on this and other wiki pages is posted by community members who are not acting for or on behalf of Novell, Inc., whether or not they otherwise have affiliation with Novell.
This site uses the YAML CSS framework.
About openSUSE | Disclaimers | Feedback
This page was last modified 10:38, 4 November 2009. This page has been accessed 29,656 times.
This site uses the YAML CSS framework.
About openSUSE | Disclaimers | Feedback
This page was last modified 10:38, 4 November 2009. This page has been accessed 29,656 times.