9.3:
(2) Using Radeon driver.
(6) Bug in YaST config: have to manually set WEP key/ESSID if using an encrypted network. Worked in 9.2.
(*) Fn-keys:

10.0:
(2) Using Radeon driver.
(C) CPU auto-scaling does not work, but the speed can be manually set with kpowersave.
(*) Faster than 9.3.

(2) Using Nvidia driver.
(*) Integrated camera worked right out of the box.

(6) With firmware RPM.

(2) Using Nvidia driver.
(6) With firmware RPM.
(*) Use pci=noapci boot parameter.

(4) With alsa-1.0.16. In /etc/modprobe.d/sound file applied option "ac97_quirk=1" and in mixer switched OFF external amplifier.
(6) Realtek RTL8185 via ndiswrapper. Download the driver here and follow this guide.
(9) Fn-keys brightness supported, but Kpower set brightness NOT supported.

{{LaptopTable2_Remark}

(2) Using ATI driver.
(6) Using Ndiswrapper.
(7) Using Conexant driver.
(C) If using fglrx ati drivers, use latest version (not the one from the repository) or suspend to disk will not work.

(2) Using ATI driver.
(6) Using Ndiswrapper.

(*) USB Wacom tablet needs 0.8.1+ drivers, not included in stock 11.0.

(13) Orinoco PC card (wireless) works automatically.

(A) ATi Radeon x1270 3D worked with default driver however caused tearing on the screen 8.12 FGLRX resolved this issue and provides full 3D no tearing.
(*) Fn keys work, volume up/down and all media controls work.
(*) Webcam worked out of the box.
(*) HDMI output worked after FGLRX installed.

(10) The TB120 is not in s2ram's whitelist, so it must be manually forced to suspend. Type the following into a root shell (less single quotes):
touch /etc/pm/config.d/sleep; echo "S2RAM_OPTS=\"-f\"". You will then need to reload the NIC modules: rmmod e1000 && modprobe e1000 works for the Ethernet.
(*) Tablet: Does not work as it is a USB tablet and Wacom has no driver yet.
(*) Fn-keys: All work except the Fn+arrow key brightness adjustment.